We are certified electricians who speak English, and our focus is the electrical side that powers your home's equipment: fuse boards, dedicated circuits and connections. We work in Lisbon, Cascais, Sintra, Almada and across Greater Lisbon, the South Bank and the Setúbal district.
Signs your fuse board needs replacing
Many Portuguese buildings and older villas still have fuse boards designed for far fewer appliances. Warning signs:
| Sign | Why it matters |
|---|---|
| Screw-in or cartridge fuses instead of circuit breakers | Older protection, less reliable and harder to reset |
| No RCD (residual current device, diferencial) | The RCD is what protects people from electric shock |
| RCD or breakers trip often | Overloaded circuits, earth leakage or failing components |
| Burning smell, scorch marks or a warm board | Loose or overheating connections: fire risk, get it checked urgently |
| No space for new circuits | New appliances can't get their own protection |
| Everything on a few circuits | One fault leaves half the home without power |
Upgrading the fuse board fixes the foundation. From there, every major appliance gets its own circuit and protection.
Dedicated circuits for your equipment
High-power appliances shouldn't share a circuit with everyday sockets. We install dedicated circuits, with the right cable size and protection, for:
- Air conditioning, one circuit per outdoor unit
- Heat pumps and electric boilers
- Water heaters
- EV chargers
Because we also install air conditioning, heat pumps and EV chargers, the electrics and the equipment have one responsible team. No finger-pointing between the electrician and the HVAC installer.
Contracted power in Portugal
Every Portuguese home has a contracted power level (potência contratada) with its electricity supplier, for example 3.45 kVA or 6.9 kVA. If you run more appliances at once than that allows, the main breaker trips.
Before installing a large appliance, we work out:
- Your contracted power and what runs at the same time
- Whether your supply is single-phase or three-phase
- Whether reorganising circuits is enough or you need to ask your supplier for more power
The power increase request goes to your electricity supplier. We tell you which level makes sense for what you want to run and prepare the fuse board for it. This is general information and does not replace confirmation with the competent authority or legal advice.
What we do
- Fuse board replacement and upgrades
- Fuse board repairs: tripping RCDs, breakers, connections
- Electrical installation for appliances: dedicated circuits and protection
- EV charger installation
Our hours are Monday to Friday 8:00 to 18:00 and Saturday 8:00 to 12:00. We don't offer out-of-hours electrical emergencies. If you notice burning smells, smoke or sparks, switch off the main breaker and call the emergency services (112) if there is immediate danger.
Plan the electrics before adding equipment
A scenario we see often: a family adds air conditioning in three rooms, swaps the water heater for a heat pump and later buys an electric car. Each job is done by someone different, at different times, and in the end the fuse board is full, circuits are improvised and the main breaker trips at dinnertime.
The better way is to plan the electrics once: contracted power, space in the board and the circuits you'll need in the coming years. Because we do both the HVAC and the electrics, we can plan the whole picture.
How we work
- Get in touch and describe the problem; a photo of the fuse board helps.
- Technical visit, with the fee confirmed before booking.
- Diagnosis and quote on site, explaining what needs doing and why.
- The work, done cleanly, with circuits labelled in the board.
- Testing each circuit and the RCD before we finish.
Labelled, documented, explained
When we finish, every circuit in the board is labelled in plain language, so you know which breaker controls the kitchen, the air conditioning or the charger. If anything trips in the future, you'll know where to look, and we'll explain it all in English before we leave.
Frequently asked questions
Common causes are moisture in a socket or appliance (washing machine, water heater, outdoor lighting), a faulty appliance or a damaged cable. Switching breakers off one by one helps isolate the circuit; a full diagnosis uses test instruments.
It depends on the number of circuits, the state of the installation and whether it's single or three-phase. We see the board and quote during the visit.
Air conditioning should have its own circuit. When we install AC, we do the electrical connection too, because we're both electricians and HVAC technicians.
Our focus is fuse boards and the electrics for the equipment we install. For larger jobs, talk to us and we'll assess.
Yes. Many older buildings in Lisbon and on the South Bank have installations designed for very few appliances. We assess cables and board and tell you what's needed to add new equipment safely.
We check the fuse board, the protective devices and the visible condition of the installation, and tell you what needs replacing. In older buildings, the fuse board is often the first thing to update.

